![background image](http://html1.mh-extra.com/html/barco/data-708hs-r9002230/data-708hs-r9002230_owners-manual_473988051.webp)
8-1
Messages, warnings and failures
5975589 BARCODATA 708 HS 080998
8
MESSAGES, WARNINGS AND FAILURES
When selecting a new source,
information about this source will
be displayed on the screen. Source
number, horizontal and vertical fre-
quencies of the displayed source.
SOURCE 01
Announcement of the selected
source.
INPUT 01
Fh= 15.6 kHz
Fv= 050 Hz
enter
password
x x x x
Message to enter your password.
Password contains 4 digits.
text on
INPUT 01
Fh= 15.6 kHz
Fv= 050 Hz
text off
These messages will be displayed
on the screen when pushing the
TEXT key.
Text ON : the
'bar scale indication'
will be enabled during the change
of an analog control in the
'opera-
tional mode'
+ all warnings and
failures will be displayed.
Text OFF : the
'bar scale indication'
will be disabled during the change
of an analog control in the
'opera-
tional mode'
+ all warnings and
failures will not be displayed.
PROJECTOR
ADDRESS :
003
Indication of the projector address
when activating the
'ADDRESS'
button on the RCU with a pencil or
other small object.
WARNING :
input not
available
When using the projector with the
RCVDS, this warning will be dis-
played when selecting an input
slot of an RCVDS where the input
board is missing.
WARNING :
source not
available
The input is a valid input but the
source is not connected to the
input terminals or the input source
is switched off.
WARNING :
invalid
key entry
When a wrong key is pressed on
the RCU.
WARNING :
end of ad-
just range
End of adjustment range.
WARNING :
input no
longer
available
Message will be displayed when
the input source is no longer avail-
able.
WARNING :
input se-
lector not
available
It warns you to check the power
connection or the power status of
the RCVDS.
Next message will appear immedi-
ately on the screen :
'go to stand-
by'
.
WARNING :
invalid
frequency
input
The entered frequency or applied
frequency of the source is out of
the projector's range.
FAILURE
I2C error
addr. : 7FH3
Hardware failure. Call a qualified
service technician for repair.
FAILURE
short
circuit on
I2C bus
Hardware failure. Call a qualified
service technician for repair.
WARNING :
invalid
code entry
Message when the entered pass-
word is wrong.
Содержание DATA 708HS R9002230
