Barco DATA 708HS R9002230, Руководство пользователя

Страница: 19 / 59

4-3
Controlling
5975589 BARCODATA 708 HS 080998
To continue using the RCU, it is necessary to enter an address with
the digit buttons (address between 0 and 9). For example : if the
Address key displays projector address 003, the press "3" digit
button on the RCU to set the RCU's address to match the projector's
address. Do not press digit 003. This will address the remote to '0'
and control all projectors in the room.
How to Program an Address into the RCU?
Press the ADDRESS key (recessed key on the RCU) with a pencil
and enter the address with the digit buttons. That address can be
any digit between 0 and 9.
Input Selection
Source No Projector input Press button
1 Comp. Video 1
2 S-Video/Comp. Video
1
2
3 RGBS or RGsB 3
3 RGB3S or RG3sB 4
3 (R-Y)Y(B-Y)S or
(R-Y)Ys(B-Y) 5
3 (R-Y)Y(B-Y)3S or
(R-Y)Y3s(B-Y) 6
The way to select an input :
With the digit buttons on the RCU, it is possible to select one of the
four input sources, Video, S-Video, RGsB or RGBS, RG3sB or
RGB3S, (R-Y)Ys(B-Y) or (R-Y)Y(B-Y)S, (R-Y)Y3s(B-Y) or (R-
Y)Y(B-Y)3S.
When a valid and available source is selected, there will be informa-
tion displayed on the screen about that source. This information
includes :
- Source number
- Horizontal frequency
- Vertical frequency
When the entry is a non valid source number, a warning appears on
the screen : ' input not available '.
When a valid source number is selected, the projector will display this
source or it will wait on the selected source number until the source
becomes available. A message 'source not available' will be
displayed for a short time.
Picture Controls
The picture controls can be adjusted with the RCU:
The control keys are located on the left side of the key panel of the
RCU and indicated with the name of the control and an icon.
When an image control is pressed, a text box with bar scale and the
function name of the control, e.g. 'brightness...' appears on the
screen (only if text is ON). The length of the bar scale indicates the
current memorized setting for this source. The bar scale changes
as the + or - buttons of the control are pressed.
When a picture control is selected, a text box with bar scale and the
function name of the control (e.g. brightness) appear on the screen.
The length of the bar scale indicates the current memorized setting
for this source (percentage scale). The bar scale changes as the
control disk is pushed to the left or to the right.
Source 2
Fh= 15.6 kHz
Fv= 50 Hz
WARNING
input not
available
WARNING
source not
available
Brightness
35