Barco CVM 2037, Инструкция по эксплуатации

Страница: 26 / 92

(1) Programmable Input
selection
(2) RIS Configuration
PROGRAMMABLE INPUT SELECTION 1
RIS CONFIGURATION 2
MONITOR CONFIGURATION
To return : CLEAR
MONITOR CONFIGURATION
PROGRAMMABLE INPUT COMPONENT MODULE
To return without saving :
To return with saving CLEAR
ENTER
MONITOR CONFIGURATION
Press 1 if you want to let the monitor know what input module is in-
stalled in the monitor (analog component or digital).
Press 2 for programming the RIS (Remote Input Selection) con-
figuration. This is to determine what can be remote selected after
connection of a small switching network to the REMOTE 2 connec-
tor on the rear side of the monitor.
In this menu you can define what kind of input module is installed
inside the monitor, an analog component or a digital one. The
monitor does not know that automatically.
Press TooL to modify data in the red field between :
COMPONENT MODULE / DIGITAL MODULE
Press
CLEAR
to return without saving.
Press
ENTER
to return with saving.
After connection of a small switching network to the REMOTE 2
connector on the rear side of the monitor, it is possible to remote
control input selection and/or most of the operation functions.
REMOTE 2
19