Barco CVM 2037, Инструкция по эксплуатации

Страница: 18 / 92

R G
,
CAL
PRE SAVE
B
COMMAND KEYS
CAL
When this key is pressed, all control functions assume calibrated
value, and picture will directly modify to calibrated status.
Hereby a list of the functions which are set by the CAL command
and how :
CON, BRI, SAT, HUE, VOL, R (ON), G (ON), B (ON), SYNC (INTERNAL), SL/F
(SLOW), MONO (COLOUR/AUTOMATIC), COMB(OFF), APT (OFF), SIZE (UNDER-
SCAN), DEL (NO DELAY), SETUP ELIM. (YES).
In addition, the 6500 K colour temperature is selected.
PRE
When this key is pressed, all control functions assume preset
values of the selected input and picture contents will directly modify
to preset status.
Following functions are set to preset status by pressing
PRE :
CON, BRI, SAT, HUE, VOL, R, G, B, SYNC, SUE, MONO, COMB, APT, SIZE AND
DEL, SETUP ELIM. .
In addition, the preset colour temperature is selected.
SAVE
Command key to memorize the actual status of the monitor as
preset status for the selected input. This status is recalled ev-
erytime you press
PRE
(except for the functions that are not set by
the preset command).
In addition, the actual colour temperature is saved.
R G B (Colour drive)
Three command keys, by the combination of which you can set
seven different colour drive modes : rgb, r-only, g-only, b-only, r-
off, g-off and b-off.
11