Barco CVM 2037, Инструкция по эксплуатации

Страница: 12 / 92

INSTALLATION
CVM 2037
CVM 2051
Visual inspection
Check for supplied accessories when unpacking the monitor :
mains cord and instruction manual.
Before installation of the monitor, inspect for damage that may
have occurred in transit. If the monitor was damaged in transit, file
a claim with the carrier.
Check if your ac power source voltage corresponds to the appro-
priate power input voltage for the monitor, noted on the rear side of
the monitor.
Check input signals
In order to obtain a correct and well synchronized picture on the
screen, first check also if the specifications of your video and sync
input signals are in accordance with the specifications or factory
settings of the display (colour system and scan frequencies).
Positioning the monitor
The monitor requires a free flow of air around it for cooling pur-
poses. For this reason, covers should never be placed on or
around the monitor and the ventilation grilles should never be
blocked. The monitor should never be exposed to direct heat
sources or excessive dust. To prevent fire or shock hazard, do not
expose this appliance to moisture.
Because of its design, the picture tube is sensitive to magnetic
fields. Therefore, the monitor should never be placed in the vicinity
of magnets or sources of magnetic disturbances, such as loud-
speakers, transformers, heavy power lines or electric motors.
The monitor contains a demagnetisation circuit which counteracts
the effect of the earth magnetism each time the monitor is switched
on. If the monitor is moved, some colour impurities may occur. You
can activate the demagnetisation circuit by pressing the
DEC
switch
(the display must be switched on).
Because of the effect of this circuit, it is advisable to keep all items
carrying magnetic information away from the monitor, for example
music cassettes, magnetic tapes, floppy discs, magnetically coded
cards.
6