![background image](http://html1.mh-extra.com/html/barco/coronis-elite/coronis-elite_user-manual_3888040049.webp)
Changing Display Functions
49
Reading room selection
This function is available only when the DICOM display function is
selected and Continuous DICOM ALC is off.
To select a reading room setting:
1.
Select the DICOM display function. See
To select a display
function (DF):
, on page 46.
2.
In the ALC & DICOM Options menu, use Up
or Down
to
select
Reading Room
. Use Enter
to go into edit mode.
3.
Use Up
or Down
to select the reading room that
corresponds to the room type the display is installed in.
4.
Use Enter
to confirm the selection.
You can select the following reading room types::
Measured ALC
The DICOM DF will be recalculated tak-
ing the averaged measured ambient
light value into account that is deter-
mined by the selected Reading Room.
This value can be changed by executing
the “Measure ALC Value” function in the
Reading Room Definition submenu.
Value
Description
Name
Description
CR/DR/MAMMO
Corresponds to light conditions in diag-
nostic reading rooms for computed radi-
ology, digital radiology or
mammography. This setting has the
lowest maximum ambient light.
CT/MR/NM
Corresponds to light conditions in diag-
nostic reading rooms for computed
tomography, magnetic resonance or
nuclear medicine scans.
Содержание Coronis Elite
