![background image](http://html1.mh-extra.com/html/barco/coronis-elite/coronis-elite_user-manual_3888040031.webp)
Display controls
31
• Touching Up and Enter at the same time selects the maximum
value.
• Touching Down and Enter at the same time selects the
minimum value.
While the OSD is not on the screen:
• Touching Up and Down at the same time switches the display
in text editing mode. In this mode the luminance is reduced so
that the display can be used for office applications other than
diagnostic applications.
To switch text mode off again, touch Up and Down again.
Stand-by switching
To switch from on state to stand-by:
1.
Touch the Stand-by
touch key.
2.
A warning message appears. Press the Stand-by touch key again
to switch the display into stand-by or press any other key to
keep the display in on state.
To switch from stand-by to on state:
1.
Touch any of the soft touch keys.
The front illumination is switched on for about 10 seconds.
2.
While the illumination is switched on, touch the Stand-by
touch key to switch the display on.
Содержание Coronis Elite
