![background image](http://html1.mh-extra.com/html/barco/coronis-elite/coronis-elite_user-manual_3888040046.webp)
Changing Display Functions
46
Changing Display Functions
Concepts
• The Display Function menu lets you select a display function
(DF).
• When you select the DICOM DF you can define the DICOM DF to
be recalculated taking the ambient light into account.
• The recalculation can be based on an illuminance of 0 lux
(“Dark Room”) or a preset value (“Preset”).
• In the case of “Preset” you must select a reading room that
corresponds to the type of room the display is installed in. E.g.
if the display is installed in a room where CT scans are
observed, the “CT/MR/NM” reading room is the preferred
selection.
• The reading room is defined by:
Maximum Ambient Light
defines the maximum light allowed
in this type of room. This value can be adjusted within certain
limits determined by the selected reading room.
Preset
Correction Value
is the predefined correction value for
this reading room. This value can be adjusted within certain
limits determined by the selected reading room.
• The reading room parameters are pre-defined in the display
according to the AAPM (American Association of Physicists in
Medicine). However they can be changed within certain
limits.
Display function selection
To select a display function (DF):
1.
Touch any of the soft touch keys.
The front illumination is switched on.
Содержание Coronis Elite
