Barco Coronis 3MP, Инструкция по установке и эксплуатации

Страница: 50 / 80

BarcoMed control panel settings Single Source Master
50
results in increased performance since the frame buffer is set to
run with 8-bit pixels. While this option may be used with
applications that normally require 10-bit support, there will be a
loss of pixel depth, i.e. 256 shades of gray instead of 1024
simultaneous shades of gray.
Disable RGB To Static Gray Color Translation
Select
Disable RGB To Static Gray Color Translation
if you wish to
have RGB values equally weighted, with 1/3 each. When not
selected, then the International Commission on Illumination (CIE
– Commission Internationale de I’Eclairage) model will be
adapted, which weights the colors as 59% Green, 30% Red, 11%
Blue.
Monitor Configuration
If the options in this section are grayed out, then they are not
available for the model controller with which you are working.
Graphics Board
There is one option in this section, the
Update Firmware
button.
Clicking this button will launch the
BarcoMed Hardware
Configuration
utility. This program allows the user to flash
update the firmware stored in the ROM of the currently selected
BarcoMed display controller. The
BarcoMed Hardware
Configuration
utility is implemented in a Wizard format, which
guides the user through the flash update procedure. The user will
be prompted to select a firmware update file to use for the
update process. This file will be provided by Barco Medical
Imaging if and when a firmware update is required.
Device details
The Device Details page provides detailed information about the
display controller connected to the active display. This
information is useful in debugging issues that may occur when
using your Barco Medical Imaging Display System.