Barco Coronis 3MP, Инструкция по установке и эксплуатации

Страница: 37 / 80

37
Please refer to your application manuals for information on
the correct Palette and Drawing modes to select.
6. When the driver setup is complete, click the
Finish
button.
The Barco Product Installation Wizard will now guide you
through the installation of MediCal QAWeb, MediCal Pro, or
NioWatch, BarcoMed SelfExam, and the Barco on-line
documentation.
7. When the Setup complete message appears, select
Reboot
System Now
and click
Finish
.
Automated display configuration
Once the drivers, software and documentation have been
installed and your system has been rebooted, the
Barco Monitor
Plug and Play Software
should automatically detect your Barco
displays and attach them to the desktop with the correct
resolution. If the
Barco Monitor Plug and Play Software
fails to
detect your Barco displays or fails to attach them to the desktop
correctly please refer to the section,
Setting the resolution of
your C
ORONIS
3MP display
on page 77 in the Troubleshooting
section of this manual.
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any
time by using the Barco Set-up wizard on your Barco system CD-
ROM, see
Installing the B
ARCO
M
ED
display controller drivers
and software
on page 35 of this manual.
Uninstalling the drivers and software
To un-install the B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
drivers,
software or documentation, please use the
Windows Add/
Remove Programs
utility. This can be found in the Windows
Control Panel.
Note:
If you installed your
B
ARCO
M
EDICAL
I
MAGING
D
ISPLAY
S
YSTEM
drivers with DualView enabled, the wizard may warn you that
DualView must be disabled before the drivers can be