![background image](http://html1.mh-extra.com/html/barco/clickshare-cse-800/clickshare-cse-800_installation-manuals_3845691075.webp)
R5900049 /07
ClickShare CSE-800
75
Image 6-22
Below the channel selection pane, an indication is given of the available bandwidth of the current channel. To
see if sufficient bandwidth is available in a different channel, select the channel in the dropdown and save the
changes. The page will reload with the new settings and an indication of the channel fit will be given after
approximately 1 minute. There is no need to reload the page to see the result.
The channels available in the list vary according to the regional version of your Base Unit. Re-pairing the
Buttons is not required when changing the frequency band or wireless connection channel.
Make sure your PC
’
s wireless interface supports the 5 GHz band before selecting it on the Base
Unit.
SSID
1.
Enter a public name (SSID) for the wireless network.
The default SSID is
ClickShare-<serial number Base Unit>
.
2.
If you want to broadcast this SSID, check the checkbox before
Enable SSID broadcast
.
WiFi passphrase
1.
Enter a new WiFi passphrase.
2.
Confirm that new WiFi passphrase.
CAUTION:
It is strongly recommended to change the Wi-Fi passphrase on first use to prevent
anyone else accessing the Wi-Fi network.
Signal strength
1.
Select the Signal Strength. Click on the slider and reduce the broadcasted power (signal strength) until the
desired strength is obtained.
Note:
Too low power and interference by others might lead to connection issues. If so, increase again
the signal strength until the issues are solved.
By default the strength is set to 100%.
Button connect
1.
Click on the drop down box next to
Button connects to
and select the WiFi frequency to which the buttons are
connected.
Note:
Changing that setting will require a repairing of the buttons.
ClickShare Configurator (WebUI) access via Wi-Fi
1.
To allow access to the configurator via Wi-Fi, check the check box in front of
WebUI available via Wi-Fi
.
Checked: Configurator accessible via Wi-Fi.
Содержание ClickShare CSE-800
