Barco ClickShare CSE-800, Инструкции по установке

Страница: 76 / 118

R5900049 /07 ClickShare CSE-800 76
Not checked: access to the configurator via Wi-Fi is blocked.
6.12 LAN Settings
About LAN network settings
A network connection can be configured through DHCP or by manually entering a fixed IP address.
The LAN interface is split up in a primary interface and a secondary interface. During normal operation both
LAN inputs have the same functionality. During standby, the primary interface acts as an network standby and
the secondary interface is than switched off.
A practical example as use case:
Integrate ClickShare within a network to manage and integrate into a network to share. For integration, one
should preferably use the primary network connector as the Buttons can only wake up the Base Unit from
network standby using the primary connector.
CAUTION: Both LAN connections must be connected to two different networks.
DHCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network
administrators manage centrally and automate the assignment of IP addresses in an organization's
network. Using the Internet Protocol, each machine that can connect to the Internet needs a unique
IP address. When an organization sets up its computer users with a connection to the Internet, an
IP address must be assigned to each machine. Without DHCP, the IP address must be entered
manually at each computer and, if computers move to another location in another part of the
network, a new IP address must be entered. DHCP lets a network administrator supervise and
distribute IP addresses from a central point and automatically sends a new IP address when a
computer is plugged into a different place in the network.
Hostname
1. Log in to the Configurator .
2. Click Wi-Fi & Network → LAN Settings .
CSE-800 Configurator