Barco ClickShare CS-100, Руководство по установке

Страница: 67 / 108

67 R5900022 /18 ClickShare CS-100 series
How to change
1. Log in to the Configurator .
2. Click Display & Audio → Display & Audio .
3. Check or uncheck the check box next to Enable Audio.
Checked: audio is enabled.
Unchecked: audio is disabled.
4. To select the audio output, click on the drop down box and select the desired audio output.
Jack: audio output via jack.
HDMI: audio output via HDMI.
5. Click on Save changes to apply the new settings.
6.10 Wi-Fi settings
WARNING: It is not allowed to operate the Base Unit outside its intended geographical region.
About Wi-Fi
A connection with the Base Unit can be made via a wireless connection. A fixed wireless IP address is used to
establish the connection.
The transmission power of the wireless signal can be reduced.
An overview of the current settings is given when Wi-Fi Settings is selected and operational mode is Access
Point .
Image 6–17 Wi-Fi settings
When operational mode is set to Off . The following info is given: “The wireless interface is disabled. Buttons
must be configured to connect to another Wi-Fi access point. Click here to go to the Button configuration
page”.
CS-100, CS-100 HUDDLE Configurator