Barco C5011S, Руководство по установке

Страница: 48 / 158

R5900120 /03 ClickShare CX-50 Gen2 48
3.19 Power connection
About power connection
The Base Unit can be powered in two ways:
• Via a 19VDC network adapter
• Via USB Type-C
TM
When both connections are made, the external power adapter has the priority.
About the power adapter
WARNING: Use a power cord which complies to local regulations. If not included in the box, contact
your local dealer for a correct power cord.
The Base Unit is intended to be powered by the Barco supplied power adapter ATM090T-A190, with power
specifications: input 100-240V, 1.2A 50/60Hz and output 19 VDC 4.74A.
Image 3–13
Via the power adapter
1. Plug the barrel connector of the power adapter into the power input of the Base Unit.
2. Slide a power input adaptor piece (US, AU, IN, CH, EU or UK) on the power adapter of the ClickShare until
it clicks. Use the one
which is applicable in your country.
3. Connect the power cable to the wall outlet.
Via USB and display
1. Connect the USB Type-C port at the backside of the Base Unit to the USB input of the display (only for
displays that can deliver power to the USB port)
Minimum power specification for the USB of the display are: 90W or 100W (20V/5A or 20V/4.5A)
CX-50 Gen2 Installation