Barco BARCOREALITY SIM 6 MK II + WARP 6, Руководство пользователя

Страница: 137 / 157

7. Service Mode
7.14 DynaColor™
What is done?
Due to the tolerance (lamps) and left-right setup (mirrors) of optical components, color differences may occur on the projected im-
age(s).
DynaColor™ allows a dynamic correction of these color differences, this is done by adding one primary color to another e.g. adding
Green to Red, the adjustment is possible on the left side, right side or both sides.
How to Start Up DynaColor?
1. Push the cursor key ↑ or ↓ to highlight
DynaColor.
(menu 7-39)
2. Press
ENTER
to select.
The
DynaColor
menu will be displayed. (menu 7-40)
SERVICE
UNIFORMITY
ELECTRONIC CONVERGENCE
DYNACOLOR
GRAY LEVEL DEFINITION
PURITY
DISPLAY BLANKING
PANEL ADJUSTMENT
PRESET INPUT BALANCE
MORE...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-39
DYNACOLOR
ADJUST
ACTIVE [OFF]
DEFAULT
INITIALIZE
Select with
↑
or
↓
<ENTER> to toggle/select
<EXIT> to return
Menu 7-40
How to Adjust DynaColor?
1. Push the cursor key ↑ or ↓ to highlight
Adjust.
(menu 7-41)
2. Press
ENTER
to select.
The
DynaColor
Info menu will be displayed. (menu 7-42)
3. Press
ENTER
to continue.
The DynaColor slider box will be displayed.
4. Use the
COLOR
key to select the desired Primary Color to adjust. (image 7-6)
5. Use the
BALANCE
key to select the left, right or both sides of the selected Primary Color. (image 7-7)
6. Use the
TINT
Key to select a Primary Color to add to the selection. (image 7-8)
7. Use the
BRIGHTNESS
key to adjust the level of adding the second Primary Color (Range: 0 to 1000). (image 7-9)
8. Press
EXIT
to return to the
Primary Color Modulation
menu.
DYNACOLOR
ADJUST
ACTIVE [OFF]
DEFAULT
INITIALIZE
Select with
↑
or
↓
<ENTER> to toggle/select
<EXIT> to return
Menu 7-41
DYNACOLOR
<COLOR>
color to adjust
<TINT>
toggle between colors to add
<BRIGHTNESS>
adjust color
<BALANCE>
toggle between left, right
and both
<ENTER> to continue
<EXIT> to return
Menu 7-42
R5976496 BARCOREALITY SIM 6 MK II + WARP 6 TM 15052003 133