Barco BARCOREALITY SIM 6 MK II + WARP 6, Руководство пользователя

Страница: 128 / 157

7. Service Mode
7.6.2 Projector Address
How to change the Projector Address?
1. Push the cursor key ↑ or ↓ to highlight
Projector Address
. (menu 7-13)
2. Press
ENTER
to select.
The actual address is filled in.
The first digit is highlighted.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with
↑
or
↓
then <ENTER>
Reprogram with
↑
,
↓
,
←
,
→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-13
How to enter the new projector address?
1. Enter the digits with the digit keys on the RCU or local keypad.
Or,
push the cursor keys
← or → to select a digit and change the value by pushing the cursor key ↑ or ↓ until the new value is reached.
Continue with the other digits on the same way. The individual address must be between 0 and 255.
7.6.3 Common Address
How to change a Common Address?
1. Push the cursor key ↑ or ↓ to highlight the active
Common Address
e.g. (RC5). (menu 7-14)
2. Press
ENTER
to select.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with
↑
or
↓
then <ENTER>
Reprogram with
↑
,
↓
,
←
,
→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-14
Entering the new common address
1. Enter with the digit keys on the RCU or the local keypad
Or,
pushing the cursor key
↑ or ↓ until the new value is reached.
Only addresses between 0 and 1 are valid.
124 R5976496 BARCOREALITY SIM 6 MK II + WARP 6 TM 15052003