Barbieri TracMow 95 EVO, Руководство оператора

Страница: 40 / 48

39
7 - MAINTENANCE
SECTION 7 - MAINTENANCE
IMPORTANT:
Whenever you hear unusual noises, it is mandatory to check the Condition of the
blades. (See 7.1.6).
Loosen the center screw (E) to remove the blade holder.
- Make sure that the blade can be turned easily in the support.
- Sharpen the blade in the same way. Pay attention to maintaining the same weight for
the two blades. Max sharpening 5mm - 30 °
- Refit the blade holder (Tightening torque 160Nm).
Carefully lay the machine on the floor.
NOTE:
For easier loosening of the blade fixing screw (E) (Fig. 30) remove the belt guard (Z)
Fig. 7. Lock the nut (F) (Fig. 29) to prevent rotation of the pulley shaft..
DANGER:
If the blades are removed from the blade support,
the fastening screws must be replaced (tighte-
ning torque 130Nm).
DANGER:
The fastening screws of the blades are safety elements, so they must always be
checked and if damaged, they must be replaced within the prescribed intervals
(every 50 hours).
60
5
E
Fig. 30 Fig. 7
Z