12
Maintenance
If there are any signs of wear or cracking in the side burner pipe, you will need to replace
it immediately. Ensure you replace it with the correct part purchased from Barbeques Galore
to ensure proper gas connection compatibility.
Connect the nut of the corrugated pipe to the gas inlet on the right side of the barbeque. You MUST
use two spanners to tighten it properly. Do not use sealing tape. The connection is designed
to seal properly without it. Perform a leak test as explained in the installation section
before using.
Replacing The Corrugated Pipe
Occasionally you will need to remove the burner for cleaning or adjustment.
To replace the burner, lower the inlet of the burner through the cutout at the top of the side burner body.
Place the open end of the burner over the gas jet at the front of the side burner. Then, screw the tabs on
the stem of the burner into the side burner body. Ensure the igniter wire is re-connected.
Replacing The Burners
