Barbeques Galore MC2CDFFL Скачать руководство пользователя

Страница: 10 / 14

The knobs have three basic positions:

OFF

and

. You can achieve any

height between

and

rotating the side burner control knob
between these positions.

Controlling The Flames

Lighting Your Side Burner

burner on high

burner on low

Light the side burner in the same way as for your main barbeque

Make sure that the gas is turned on at the cylinder, or that gas is available
to the barbeque. Also, ensure the side burner lid is up whenever the side
burner is in use..

Automatic Ignition

: Push the knob

and turn anticlockwise to the

position. Hold the knob in until the burner ignites. You may need to push
and turn the knob several times before ignition.

Manual Ignition

: You can light the side burner manually by holding a lit

match next to the burner, then turning the burner control knob to

Lighting The Side Burner

If the burner doesn’t light rst go, return the knob to the

OFF

position and try a couple more times. If the

burner still does not light, turn the burner

OFF

, wait a few minutes to allow the gas to disperse before trying

again. If satisfactory operation cannot be achieved, consult your retailer before proceeding.

Note carefully:

Failure to follow the lighting procedures correctly can lead to a hazardous condition.

If You Hav

Turning Off

To turn the side burner

OFF

, it is best to turn off the cylinder rst, and allow all the

gas left in the hose to burn off. This will only take a couple of seconds. Then turn

OFF

the burner controls. If your barbeque is connected to natural gas or piped LPG,

you can simply turn the burner controls

OFF

It’s okay to leave the cylinder connected to your barbeque while it’s not in use

，

but

keep the cylinder valve turned

OFF

Note carefully

: Failure to follow these shutdown procedures correctly can lead to

a hazardous condition.

OFF

Содержание MC2CDFFL















Результаты поиска

Содержание MC2CDFFL

Отзывы:

Похожие инструкции для MC2CDFFL

Бренды по названию

Популярные бренды

Barbeques Galore MC2CDFFL, Инструкция по эксплуатации

Результаты поиска

Содержание MC2CDFFL

Отзывы:

Похожие инструкции для MC2CDFFL

Бренды по названию

Популярные бренды