4
Assembling Your Side Burner
Checking The Gas Type
IMPORTANT! Before assembling the side burner, you should ensure it is suited to
the same gas type as your barbeque.
Check the gas type sticker on both your barbecue and side burner. If your barbeque or side burner
is
suited
to
LPG,
it should have a red printed sticker on the side saying “UNIVERSAL LPG”; you should
ensure your side burner has a similar red printed sticker.
If your main barbecue is set up for natural gas, it should have a white sticker on the side saying
“NATURAL GAS ONLY”. In this case, your side burner will also need to be converted for use with
natural gas, using the conversion kit (part no. NGCJCDB)
available at your nearest Barbeques
Galore store. Gas type conversions must be done by a licensed gas tter or authorised service
agent.
It is extremely dangerous to use the barbeque with the wrong type of gas. Fire or explosion
may result.
1 x side shelf + 1 side burner
or
2 x side shelves
4 x 30mm long screws
(2 for each folding shelf)
7 x 15mm short screws
1 x pair of side table bracket sets
(2 for each folding shelf)
STEP 2: Check You Have All The Parts
These instructions cover the assembly of a side shelf and side burner to the Cordon Bleu
L-series range of barbeques.
It is important to note that this side burner attaches
only to the right side of the barbeque.
These instructions illustrate a right handed side burner connection.
STEP 1: Prepare For Assembly
Start by unpacking the side burner, and placing it on a smooth,
surface. Be careful not to
damage the stainless steel or enamel
If there is any protective
on the side burner,
it should be removed at the end of the assembly process . Remove and thoughtfully dispose
of all packing materials.
MC2CDFSL
2 x locking nuts and bolts
(2 for each folding shelf)
