2. Use a bottle brush with a flexible handle. Run the brush through
the burner tube and inside the burner several times, removing any
debris.
3. Preferably, an air hose should be used to force air through each
burner tube. The forced air should pass debris or obstructions
through the burner and out the ports.
Figure 2
GAS VALVE
ASSEMBLY
BURNER TUBE
ORIFICE
Figure 3
SPARK
ELECTRODE
ASSEMBLY
BURNER TUBE
PHILLIPS HEAD
SCREW
BURNER PORTS
BURNER
GAS
COLLECTOR
BOX
WARNING
The location of the burner tube with
respect to the orifice is vital for safe
operation. Check to ensure the orifice
is inside of the burner tube before
using your gas grill (
Figure 2
).
If the burner tube does not fit over the
valve orifice, lighting the burner may
cause explosion and/or fire.
- 6 -
Outdoor BBQ Built-in Installation Specifications
Prior to installing unit, side and rear trims must be installed to fully support the unit.
Built-in Trim Kit Installation:
Carefully remove the stainless steel trim pieces from the carton and attach Left, Right & Rear stainless trims to left, right &
rear sides of barbecue using nuts & bolts as shown in Figure 4 . Check to make sure they are aligned flush with the side
barbecue face and top before fully tightening the bolts.
NOTE:
When choosing a location for your Gas grill, keep in mind that it should not be located under any overhead com-
bustible construction. The side and bottom of the grill should not be any closer than 18 inches to combustible construction,
and the back of the grill should not be any closer than 24 inches to combustible construction.
TO CLEAN BURNER TUBE
INSERT HOOK HERE
BAI08A NG/LP
Rear Trim:
(A)
- (6x) 3/16
x 1/2
Pan Head with Cross Recess Bolt
(B)
- (2x) 1/4
x 1/2
Pan Head with Cross Recess Bolt
Left & Right Trim:
(A)
- (6x) 3/16
x 1/2
Pan Head with Cross Recess Bolt
(B)
- (10x) 1/4
x 1/2
Pan Head with Cross Recess Bolt
Figure 4
Fig 1
Fig 2
Rear Trim:
52" BBQ uses 4 bolts
38" BBQ uses 3 bolts and Wok uses 2 bolts
Rear Trim:
(A)
- (3x) 1/4
x 1/2
Pan Head with Cross Recess Bolt
Left & Right Trim:
(A)
- (12x) 1/4
x 1/2
Pan Head with Cross Recess Bolt
(B)
- (4x) 1/4
Funt Nut
B3808ANG/LP
Models
n
Models
Содержание Grand Turbo B3808ALP
Страница 10: ...BAI08A LP BAI08ANG Parts Diagram 9 37A 76 77 92 58 70A 74 75 93 Optional ...
Страница 11: ...B3808ALP B3808ANG Parts Diagram 10 77A 71 72 93 94 96 95 77B 97 69 70 98 Optional ...
Страница 21: ...Figure 17 Figure 18 B5208ACT Models B3808ACT Models 20 ...
Страница 52: ...Barbeques Galore 949 597 2400 10 Orchard Road Suite 200 Lake Forest CA 92630 z z z ...