2b.
Cart model: Pass the hose through the hole in the cart
and connect the 12ft hose directly to the Natural Gas
Regulator. Make sure you have installed a Shutoff Valve
on the supply line.
3.
Turn the gas supply on and fully open the shutoff valve.
Use a soapy water solution to check all connections for
leaks before attempting to light your grill. See
Checking
for Gas Leaks
on
page 27
. If a leak is found, turn the
gas supply off and do not use your grill until the leak is
repaired.
Operating Fuel Gauge
Calibration Procedure:
1.
Before installing batteries be sure the gas tank is not
mounted in the Tank Tray.
2.
Pull out the Tank Tray. Rotate the Battery Box Retainer
on the bottom of Tank Tray. See
Figure 28
.
3.
Carefully remove the Battery Connector with electric
wire from the bottom of Tank Tray. Insert 9V battery (pro-
vided) to the battery Connector. Return the assembled
Battery to position.
4.
Rotate the Battery Box Retainer back into place.
5.
During calibration the Fuel Gauge Display shows the
tank images of FULL and then EMPTY quickly.
Fuel Gauge Display - Operating
Press the
CHECK
button to operate Fuel Gauge Display
with the gas tank mounted in the Tank Tray.
NOTE: Tank must be positioned in tray for Fuel Gauge
Display check.
1.
Fuel Display: Indicates gas tank fill level.
2.
Fuel Warning Display: When the gas tank fill level is on
the last row, a warning signal will sound for approxi-
mately 3 seconds to warn you that the tank volume is
near empty.
3.
Battery Warning Display: A low battery warning light will
illuminate when the battery voltage drops to a low level.
Replace the batteries.
NOTES:
1.
The Fuel Gauge Display lasts for approximately 20 sec-
onds each time you press the
CHECK
button. After 20
seconds, the Fuel Gauge Display turns off automatically.
If you press the button a second time within 20 seconds,
the Fuel Gauge Display will be turned off manually. If
you press the button a third time after 20 seconds, the
Fuel Gauge Display will work and last for another 20
seconds.
2.
The Fuel Gauge Display works only with a tank on the
Tank Tray. No readout will appear if a tank is not mount-
ed on the Tank Tray.
TANK PULL-OUT TRAY
ELECTRIC
WIRE
B A T T E R Y
CONNECTOR
9V BATTERY
BATTERY BOX
RETAINER
Figure 28
IMPORTANT: When the gas tank is removed from the
tank tray, the fuel gauge display will not operate.
F
E
CH CK
L
UE
D
IN
A
IC TOR
E
F
FUEL
DISPLAY
Figure 29
BATTERY WARNING
DISPLAY
CHECK
BUTTON
FUEL
WARNING
DISPLAY
Congratulations
Your Barbeques Galore gas grill is now ready for use.
Before the first use and at the beginning of each season
(and whenever the LP gas tank has been changed):
1.
Read all safety, lighting and operating instructions.
2.
Check gas valve orifices, burner tubes and burner ports
for any obstructions.
3.
Perform gas leak check according to instructions found
on
page 27
of this manual.
-
26
-
Содержание Grand Turbo B3808ALP
Страница 10: ...BAI08A LP BAI08ANG Parts Diagram 9 37A 76 77 92 58 70A 74 75 93 Optional ...
Страница 11: ...B3808ALP B3808ANG Parts Diagram 10 77A 71 72 93 94 96 95 77B 97 69 70 98 Optional ...
Страница 21: ...Figure 17 Figure 18 B5208ACT Models B3808ACT Models 20 ...
Страница 52: ...Barbeques Galore 949 597 2400 10 Orchard Road Suite 200 Lake Forest CA 92630 z z z ...