Barazza 1FVCFY, Инструкция по эксплуатации

Страница: 10 / 288

10
EN
Basic settings
Timer
The timer functions like an egg timer. It can be used at any time and independently of all other functions.
To set the Timer proceed as follows:
1. Press the Timer key. The function key lights up
and the Clock display starts blinking.
2. Press the
“
+
” and “ – ” keys to set the Timer
value.
3. Press the Timer key to validate. The Timer will
start counting-down.
When the set time has elapsed the oven will emit
three beeps that will be repeated every 30
seconds or until the
Timer or Stop keys are
pressed.
While the Timer is running the Timer light is on.
The display and lights show the following:
1. If there is no function running, the Clock display
shows the Timer counting-down.
2. If there is an active function, the displays and
lights show the normal function parameters. To
check the Timer’s remaining time press the
Timer key. The Clock display will briefly show
the Timer and resume the function indications
after 10 seconds or once the Timer key is
pressed again.