Baofeng BF-17H Series, Руководство пользователя, Страница: 38 / 52

36
(26) Reset (Reset) – MENU + 26
With this function you can reset the transceiver to the factory-programmed settings and parameters. After that, you can set the desired
functions. There are two types of reset:
• VFO: Menu Reset
• ALL: Menu and channel Reset
7.4 Program Channel
Channel configuration is only applicable to the current channel and will not change the configuration parameters of other
channels. It allows to modify the channel name, Receive or Transmit frequency, Tx_Rx CTCSS/DCS, add the current channel to
the scan list, Working Mode, and channel memory and channel delete.
(1) Channel name (CHNAME) – MENU +1
To set the channel name you have at your disposal 26 letters (A-Z) and 10 numbers (0-9). You can use up to 8 characters for the channel name.
Edit the desired channel name with the keypad and then confirm by pushing key. To exit the function press key.
(2) RX Frequency – MENU +2
Input the RX frequency by keypad, click the key to save, press EIXT key to return.
(3) TX Frequency – MENU +3
Input the TX frequency by keypad, click the key to save, press key to return.
(4) Transmit power (Tx Power) – MENU +4
Set up the TX power for current channel.
(5) Wide/Narrow Bandwidth – MENU +5
Select wideband or narrowband for the current channel.
Wide: 25 KHz; Narrow: 12.5 KHz
(6) Receiving CTCSS (Rx CTCSS) – MENU +6
As DCS codes, the CTCSS codes can be added to the channels for creating new private channels.
Note: there are 50 groups of CTCSS tones.