27
Note: When the dual watch function is turned on, the icon 'D' is displayed on the screen, and the "Singal Mode" submenu
is automatically shielded in the radio setting menu.
After the dual watch is turned off, the radio setting menu will automatically add "Singal Mode". After turning on the
single display mode, the radio will display the channel name, frequency and channel sequence on the same screen.
6.4
Manual Programming (Channels Memory)
Memory channels are an easy way to store commonly used frequencies so that they can easily be retrieved at a later date.
The radios features 999 memory channels that each can hold: Receive and transmit frequencies, transmit power, group
signaling information, bandwidth, ANI/ PTT-ID settings and a six character alphanumeric identifier or channel name
1
.
Frequency Mode vs. Channel Mode
In standby mode, press and hold the
key to switch between frequency (VFO) mode and channel (MR) mode.
These two modes have different functions and are often confused.
Frequency Mode (VFO):
Used for a temporary frequency assignment, such as a test frequency or quick field programming if
permitted.
Channel Mode (MR):
Used for selecting preprogrammed channels.
Ex 1. Programming a Channel Repeater Offset with CTCSS Tone
EXAMPLE New memory in Channel 10:
RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) Offset)
TX CTCSS tone 123.0
(1) Press the
key to switch between menus.
(2) Press and hold the
key to set the radio to VFO mode, and the VFO icon is displayed on the right.
(3)
[4]
[1][7]
[1] [0]
Deletes Prior Data in channel (Ex. 10)
(4)
[4]
[5]
123.0
Selects desired TX encode tone (Ex 123 CTCSS)
(5)
[4]
[1][4]
[0][5]
Enter the OFFSET frequency (Ex. 5.00MHz)
Содержание BF-17H Series
Страница 1: ...Amateur Radio BF 17H SERIES USER S MANUAL...
