Baofeng BF-17H Series, Руководство пользователя

Страница: 33 / 52

31
(1) Press the key to enter the menu.
(2) Use the numerical keypad to enter the number of the menu item.
(3) To enter the menu item, press
the key.
(4) For entering the desired parameter you have two options:
a) Use the arrow keys as we did in the previous section; or
b) Use the numerical keypad to enter the numerical short-cut code.
(5) And just as in the previous section;
a) To confirm your selection, press and it will save your setting and bring you back to the main menu.
b) To cancel your changes, press and it will reset that menu item and bring you out of the menu entirely.
(6) To exit out of the menu at any time, press the key.
(7) All further examples and procedures in this manual will use the numerical menu short-cuts.
+ 1: Quick access to Banks selection, up to 10 banks are stored, each bank stores 100 channels;
+ 2: Quickly enter the Scan Settings. You will be able to set the VFO frequency range, Scan mode, Scan Sub-Code, Scan
Memory;
+ 3: Quickly enter the Radio settings (general settings of the radio);
+ 4: Quick access to Program Channel (Alias, TX and RX Frequency, TX Power, Bandwidth, Display mode, Channel
Memory and Channel delete);
+ 5: Quickly query the radio information (ANI ID, Firmware version, Hardware version);
7.3 Radio Settings
(1) Step frequency (Step) – MENU + 1
This function lets you select the desired frequency step.
The selectable steps are the following: 2.5K/5.0K/6.25K/10K/12.5K/20K/25K/50K/100K.
Note: in channel mode, this function cannot be modified.
(2) Squelch level (Squelch) – MENU + 2