Baofeng BF-17H Series, Руководство пользователя

Страница: 19 / 52

17
Frequency (VFO) mode is very handy for experimentation out in the field. Frequency (VFO) mode is also used for
programming channels into memory.
In Channel (MR) mode you can navigate up and down the channel by using the
 or  keys or the encoder.
Ultimately which mode you end up using will depend entirely on your use case.
Press and hold
key to switch the radio between VFO and Channel mode, select Channel mode.
•
Operation 1 : Press the  or  navigation key to select the channel.
•
Operation 2 : Input the channel numbers by the keyboard. For example, if you want switch to channel 12, input [0][1][2] a
total of 3 digits, and it will switch to channel 12.
When the voice prompt function is enabled, the corresponding channel will be broadcast by voice.
5.7 Selecting a Bank
A bank is a group of channels with the same property. The radio supports up to 10 banks, with a maximum of 100 channels
per bank. To select a bank, do one of the following:
Press
key go to Menu > Bank, press

or

navigation key to select a bank, and then press key to switch to the
selected bank.
The corresponding regional alias will be displayed at the bottom of the screen.
5.8 Making a call
NOTE: Press the key to switch the main channel to the other channel if there are 2 channels shown on the display. In
standby mode, press and hold the key to switch between frequency (VFO) mode and channel (MR) mode.
• Channel mode call : After selecting a channel, hold down the [PTT] key to initiate a call to the current channel. Speak into
the microphone with normal tone. Making a call, the red LED is on.
• Frequency mode call : Press and hold the key to switch to the frequency mode, input the working frequency within the
allowable frequency range, and press and hold the [PTT] key to transmit on the current frequency. Speak into the
microphone with normal tone. Making a call, the red LED is on.
• Receive a call : When you release the [PTT] key, you can answer it without any action.