manualshive.com logo in svg

Banner Sure Cross DXM1200-Bx, Инструкция по эксплуатации, Страница: 44 / 62

Поделиться
Скачать
Banner Sure Cross DXM1200-Bx Скачать руководство пользователя страница 44

Figure 17. Scheduler > One Time Events screen

1. Click on Add One Time Event.

A new one-time event is created.

2. Click on the arrow to expand the parameters into view.

The user-defined parameters are displayed.

3. Name your one-time event by clicking on the name link and entering a name.
4. Enter the local register.
5. Enter the starting time, date, and starting value for the local register.
6. Enter the ending time, date, and ending value for the local register.

8.1.3 Create a Holiday Event

Use the Scheduler > Holidays screen to create date and/or time ranges that interrupt weekly events.

Figure 18. Scheduler > Holidays screen

1. Click on Add Holiday.

A new rule is created.

2. Enter a name your new holiday rule.
3. Select the start date and time for the new holiday.
4. Select the stop date and time for the new holiday.

8.2 Authentication Setup

The DXM1200 has three different areas that can be configured to require a login and password authentication.

• Webserver/ Cloud Services Authentication

• Mail Server Authentication

• DXM Configuration Authentication

The webserver and mail server authentication depends upon the service provider.

8.2.1 Set the Controller to use Authentication

The DXM1200 can be configured to send login and password credentials for every HTTP packet sent to the webserver. This

provides another layer of security for the webserver data.
Configuration requires both the webserver and the DXM1200 to be given the same credentials for the login and password.

The webserver authentication username and password are not stored in the XML configuration file and must be stored in

the DXM1200.

1. From within the DXM Configuration Software, go to the Settings > Cloud Services screen.
2. In the upper right, select Show advanced settings.
3. Define the username and password in the Web Server Authentication section of the screen.

Figure 19. Web Server Authentication screen

The first time you select Require Authentication, a pop-up box appears with additional instructions. Since the data is
not stored in the XML configuration file, it is hidden from view of the DXM Configuration Software.

Sure Cross

®

 DXM1200-Bx Wireless Controller

 

 

44

www.bannerengineering.com - Tel: + 1 888 373 6767

 

Содержание Sure Cross DXM1200-Bx































































Отзывы:

Нет отзывов