3 Sensor Programming
Program the sensor using the
buttons
on the sensor or the input wire (limited programming
options;
see
on page 12 for
details).
In
addition
to programming the sensor, use the input wire to disable the
buttons
for security,
preventing
unauthorized or accidental
programming changes. See
Locking and Unlocking the Sensor
on page 13 for more
information.
3.1 Setup Mode
1. Access Setup mode from Run mode by pressing and holding MODE for longer than 2 seconds.
2. Use
or
to navigate through the top menu.
3. Select the desired submenu by pressing
and
simultaneously.
4. Press
or
to view the available
options
in the submenu.
5. Select a submenu
option.
• Press
and
simultaneously to select and save a submenu
option
and return to the top menu.
• Press
and
simultaneously for longer than 2 seconds to select and save a submenu
option
and return to Run
mode.
Note: The current submenu
selection
is solid, all other
selections
flash.
To exit Setup mode from the top menu and return to Run mode, navigate to
and press
and
simultaneously, or press
and hold
and
simultaneously for longer than 2 seconds to return to Run mode from anywhere in the top menu.
3.1.1 Output
Operation
Use this menu to select the output
operation
mode. The default is light operate.
•
—Light operate. The output is on when the sensor detects a light state
•
—Dark operate. The output is on when the sensor detects a dark state
3.1.2 TEACH Menu
Use this menu to select the TEACH mode. The default is two-point
static
TEACH mode.
•
—Two-point
static
TEACH
•
—Dynamic TEACH
•
—Window set
•
—Light set
•
—Dark set
After
the TEACH mode is selected, from Run mode, press and hold TEACH for longer than 2 seconds to access the TEACH mode and
additional
information
and remote input TEACH
instructions.
When Window set, Light set, or Dark set are selected, the sensor returns to the Setup menu and the
Offset
Percentage menu (
)
becomes available to set the
offset
percentage.
3.1.3
Offset
Percentage
Use this menu to select the
offset
percentage when Window set, Light set, or Dark set TEACH modes are selected. The default is 20% for
Window and Light Set, and 50% for Dark Set.
Window and Light Set
options:
•
—minimum
•
—10%
•
—20%
•
—30%
Q3X Laser Contrast Sensor
8
www.bannerengineering.com - Tel: 763.544.3164
