Banner Q3XTBLD150-Q8, Инструкция по эксплуатации

Страница: 15 / 31

Method Action Result
Push Button Press and hold TEACH for longer than 2 seconds.
and flash alternately
on the display. The DYN and WND
indicators flash.
Remote Input No action required. n/a
3. Teach the sensor.
Method Action Result
Push Button Press TEACH to teach the target. The sensor is taught the first target.
and flash alternately
on the display. The DYN and WND
indicators flash.
Remote Input Single-pulse the remote input.
T
4. Present the target.
Method Action Result
Push Button
Present the second target. The sensor-to-target distance must be within the
sensor's range.
and flash alternately
on the display. The DYN and WND
indicators flash.
Remote Input
5. Teach the sensor.
Method Action Result
Push Button Press TEACH to teach the target.
The sensor is taught the second target
and the sensor returns to Run mode.
Remote Input Single-pulse the remote input.
T
Table 3: Expected TEACH Behavior for Two-Point Static TEACH
Condition TEACH Result Display
At least one taught condition is between
the minimum and maximum signal level
limits.
Sets the threshold between the two taught
conditions.
The current NSS displays.
Both taught conditions are darker than the
minimum signal value limit.
Sets the threshold at the minimum level.
Sets the sensor at the maximum detection
condition.
briefly displays, and then the current
NSS displays.
Both taught conditions are brighter than
the maximum signal value limit.
Sets the threshold at the maximum level.
Sets the sensor at the minimum detection
condition.
briefly displays, and then the current
NSS displays.
Both taught conditions are at the same
signal level. This is a Calibration Set.
Sets the threshold slightly below the two
taught conditions.
briefly displays, and then the current
NSS displays.
3.5.3 Dynamic TEACH
Dynamic TEACH sets a single switching threshold during machine run conditions. Dynamic TEACH is recommended for applications
where a machine or process may not be stopped for teaching. During Dynamic TEACH, the sensor takes multiple samples of the light
and dark conditions and automatically sets the switch point at the optimum level.
Q3X Laser Contrast Sensor
www.bannerengineering.com - Tel: 763.544.3164 15