Banner Q3XTBLD150-Q8, Инструкция по эксплуатации

Страница: 9 / 31

• —40%
• —50%
Dark Set options:
• —minimum
• —25%
• —50%
• —100%
• —200%
3.1.4 Response Speed
Use this menu to select the response speed. The default is 1 millisecond.
• —250 microseconds
• —1 millisecond
• —5 milliseconds
Table 1: Tradeoffs
Response Speed Repeatability Crosstalk Immunity High Efficiency Light Rejection
250 µs 60 µs Disabled Disabled
1 ms 300 µs Enabled Disabled
5 ms 520 µs Enabled Enabled
25 ms (Master-Slave Sync) 13 ms
Best for direct line of sight
crosstalk
Enabled
3.1.5 Output Timing Delays
Use this menu to select the output timing delay to be set. Only one delay type can be used at a time. The default is no delay.
• —No delay
• —Enables simultaneous on and off delay timers
• —One-shot. Enables a one-shot, fixed output pulse duration
Output
OFF Delay
ON Delay
Time
1-Shot
ON
OFF
D
D
D
D
D D
(D = 1ms - 90.0s)
Figure 6. Output Timing Delays
When either or is chosen, the sensor returns to the Setup menu and additional options become available to set the
timer(s):
• —On delay
Q3X Laser Contrast Sensor
www.bannerengineering.com - Tel: 763.544.3164 9