Action
Result
Pulses
TEACH Mode
1
T
Two-point
static
TEACH
2
T
T
T
Dynamic TEACH
3
T
T
T
T
T
One-point window set
4
T
T
T
T
T
T
T
One-point light set
5
T
T
T
T
T
T
T
T
T
One-point dark set
The selected TEACH method displays for a few
seconds and the sensor returns to Run mode.
3.3.2 Reset to Factory Defaults Using the Remote Input
Eight-pulse the remote input to apply the factory defaults and return to Run mode.
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
Note: The input wire
function
remains at remote teach input (
).
3.4 Locking and Unlocking the Sensor
Buttons
Use the lock and unlock feature to prevent unauthorized or accidental programming changes. There are three
different
settings
available:
•
—The sensor is unlocked and all
settings
can be
modified
(default).
•
—The sensor is locked and no changes can be made.
•
—The switch point value can be changed by teaching or manual adjustment, but no sensor
settings
can be changed
through the menu.
When in
mode,
displays when (-)(MODE) or (+)(TEACH) are pressed.
When in
mode,
displays when (-)(MODE) is pressed and held. To access the manual adjust
options,
briefly
press and
release (-)(MODE) or (+)(TEACH). To enter TEACH mode, press the (+)(TEACH)
button
and hold for longer than 2 seconds.
Button
Instructions
To enter
mode, hold
and press
four
times.
To enter
mode, hold
and press
seven
times.
Holding
and
pressing
four
times
unlocks the sensor from either lock mode and the sensor displays
.
Remote Input
Instructions
1. Access the remote input.
Action
Result
Four-pulse the remote input.
T
T
T
T
T
T
T
The sensor is ready to have the
button
state
defined
and
displays.
2. Lock or unlock the sensor
buttons.
Q3X Laser Contrast Sensor
www.bannerengineering.com - Tel: 763.544.3164
13
