Banner L-GAGE LTF, Инструкция по эксплуатации

Страница: 15 / 38

Action Result
Present the target.
The target's distance measurement value
displays.
2. Access the TEACH midpoint mode and TEACH the sensor.
Action Result
Navigate: MENU > Dx_OUT > TchMid > TchMdPt
"TchMdPt Teaching" displays while the
sensor is being taught.
TEACH Accepted
The new value is shown on the second line
of the display and flashes before it is saved
and the sensor returns to "TchMid
TchMdPt".
TEACH Not Accepted
"FAIL" and a warning message display, and
the sensor returns to "TchMid TchMdPt".
Remote Input Instructions
1. Access the TEACH mode.
Action Result
Single-pulse the remote input.
T "RMT TCH" and the current measurement
value display.
2. Present the target.
Action Result
Present the target.
"RMT TCH" and the target's measurement
value display.
3. TEACH the sensor.
Action Result
Five-pulse the remote input.
T T
T
T
T
T
T
T
T
"TchMdpt Teaching" displays while the
sensor is being taught.
TEACH Accepted
The new value displays on the second line
of the display, flashes, and the sensor
returns to Run mode.
TEACH Not Accepted
"FAIL" and a warning message display, the
sensor returns to step 2, and "RMT TCH"
displays.
Window TEACH Offset
Use the D_OUT > TchMid > Offset menu to set an offset from the taught distance used during a Midpoint TEACH. By
default, the value is 0 mm because the window is centered around the taught distance. A positive offset value always shifts
the window towards the sensor.
3.5.3 Adjust Switch Point One
The AdjSPt1 option manually adjusts the value of the switch point one threshold for the Discrete Output when the sensor is
in Window mode. The value is adjustable within the sensor's range. It is required to be maintain the minimum window size
between switch points. This menu is not available when the sensor is in Switch, Alarm, or Health mode.
Remote Input: Not available
Default: 50 mm
L-GAGE
®
LTF Time of Flight Laser Distance Sensor with IO-Link
www.bannerengineering.com - Tel: + 1 888 373 6767 15