Figure 20. Normal Display Orientation
Figure 21. Inverted Display Orientation
3.8.4 Sleep
The Sleep option sets when the display is put to sleep. Four timing options are available: 1, 5, 15, or 60 minutes. Sleep
mode is disabled by default. Sleep occurs in Run mode and any menu. To wake the sensor and return to the last viewed
mode or menu, press any button.
Navigate: MENU > DISPLAY > Sleep
Remote Input: Not available
Default: Disabled
3.9 Information Menu (INFO)
Use this menu to view model, part number (P/N), serial number (S/N), and firmware version (Version) information. Select one
of these options to view specific information for your sensor. This information is read-only.
Navigate: MENU > INFO
Remote Input: Not available
MENU INFO
or
or
Go Back to Parent Menu
Select Menu Item
Press to Save Setting
Press and Hold to Go Back
to Run Mode
INFO Version
INFO Model
Version 1.0.0
Model LTF12K
INFO P/N
P/N 801130
INFO S/N
S/N F..S..P..D..
Figure 22. Information Menu Map
3.10 Reset Menu (RESET)
Use this menu to restore the sensor to the factory default
settings.
Navigate: MENU > RESET. Select Yes to apply the factory
defaults; select No to return to the Reset option without
changing any sensor settings.
Remote Input: Eight-pulse the remote input
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
MENU RESET
or
or
Go Back to Parent Menu
Select Menu Item
Press to Save Setting
Press and Hold to Go Back
to Run Mode
RESET No
RESET Yes
Figure 23. Reset Menu Map
L-GAGE
®
LTF Time of Flight Laser Distance Sensor with IO-Link
www.bannerengineering.com - Tel: + 1 888 373 6767
25
