97654 v.7
61
12.9 Vehicle Selection
The iDash 1.8 has multiple vehicle
selections to accommodate the
hardware setup and/or take advantage
of additional parameters available.
Each iDash 1.8 (Standard) can be set
for either "
Standard
," "
No OBD
,"
Vehicle Specific, or an Aftermarket
ECU. If using the iDash 1.8 Banks Bus
1, you can additionally set it to "
B-Bus
1
"
Standard Setting
All iDash 1.8 are pre-programmed to
the "
Standard
" vehicle setting and
will read parameters common to most
vehicles.
No OBD Setting
When using it without communication
to an ECU, select the "
No OBD
" option
from vehicle selection.
Vehicle Specific Setting
After selecting your vehicle (if
available), more parameters will be
available for display on the iDash 1.8.
If you connect the iDash 1.8 with the
Derringer Tuner, the iDash1.8 will be
automatically set to your specific
vehicle.
Aftermarket ECU Setting
If you are using the iDash 1.8 with
an aftermarket ECU, reference iDash
1.8 aftermarket ECU setup, Owners
Manual
97670
for more details.
New aftermarket ECU's added
with new firmware updates.
Banks Bus 1 Product Setting
(iDash 1.8 Banks Bus 1 Only)
The iDash 1.8 Banks Bus 1 connected
to the Banks Bus 1 products must be
set to "Vehicle Selection" "
Banks Bus
1 Product
" in order to communicate
with the vehicle and Banks Bus 1
Products.
To change your "Vehicle
Selection" setting:
1.
Select
"Settings"
from the main
"
MENU
."
2.
Select
"Vehicle Selection."
3.
The initially highlighted setting is
the current setting of the iDash 1.8.
Highlight the desired vehicle setting
and select it.
4.
The iDash will reboot and return to
the
Gauge Screen.
SETTINGS,
CONTINUED
A
C
D
B
Figure 12-7
