20
97654 v.7
SECTION: 3
SOFTWARE INTRODUCTION AND
INTERFACE
SELECT
button
Hold to... :
- Save and return
to Gauge Screen
UP
button
Hold to... :
- Rapid scroll
(Value Selection)
DOWN
button
Hold to... :
- Rapid scroll
(Value Selection)
- Start/Stop
(Datalog Mode)
Figure 3-1 – Button Function
.
BACK
button
Press to... :
- Create Laps/
Markers
(Data Log Mode)
Hold to... :
- Return to
Gauge Screen
3.1 Button Navigation
Press the
SELECT
button (see
Figure 3-1
) to enter menus or select
an item. Holding down the button saves
the current selection and returns to the
Gauge Screen
.
Use the
UP
button or
DOWN
button (see
Figure 3-1
) to change
values or scroll through the menus.
Hold down the button for rapid scroll/
value change.
For the iDash 1.8 with Data Logging,
holding the
DOWN
for two (2)
seconds while viewing the
Gauge
Screen
starts and stops data logging.
A single press of the
BACK
button
(see
Figure 3-1
) returns you to the
previous menu/screen. Holding down
the
BACK
button will return you to the
Gauge Screen.
When data logging and viewing the
Gauge Screen
, you can set laps/
markers in a data log session by
pressing the
BACK
button.
