Replacement of modules 5.
Replacement of modules
Modules that can be replaced
BeoCenter 6-26 Mounting servicestands .................... 5.5
BeoCenter 6-26 in service position ............................. 5.6
Main chassis in service position .................................. 5.7
Replace contrast screen ............................................. 5.8
Replace 999 Module, Main chassis ............................. 5.9
Replace LCD ............................................................ 5.3
Replace PCB6, Microprocessor module ..................... 5.5
Replace PCB7, PC Sound ......................................... 5.6
Replace PCB8, Decoupling module .......................... 5.7
Replace PCB0, Sound output module ..................... 5.8
Replace PCB, IR/Autocontrast module .................. 5.9
Replace PCB2, DVB-S ............................................. 5.20
Replace PCB32, DSM module .................................. 5.22
Replace PCB37, DAB module ................................... 5.23
Replace PCB5, Masterlink module .......................... 5.24
Replace PCB59, Camcorder module ......................... 5.25
Replace PCB6, BtB module ..................................... 5.26
Replace PCB63, System modulator ........................... 5.27
Replace PCB64, Powerlink module ........................... 5.28
Replace PCB85, FM tuner module ............................ 5.29
Replace PCB88, Interface module ............................ 5.30
Short-circuit C707 on PCB4, SMPS
as shown. If not, you will damage
the LCD panel!
Warning – Discharge the power supply before dismantling
The power supply must be discharged before dismantling and/or replacement of
LCD, any modules or PCB’s.
There is a major risk of damaging the LCD when the connection between the LCD
and the Main chassis is disconnected and the power supply has not been discharged.
Purpose of replacement of modules
Short instructions for replacement of the available modules, with reference to
additional illustrations:
- The correct sequence for replacing modules.
- Text and illustrations.
- Reference to adjustment.
Modules that do not require any special procedure may be shown as only illustrations.
C70
7
+
l
C707
+
l
100 Ohm
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK
