Service mode 4.7
SCALER SUB MENU
When you edit data, the lower half of the menu and the Current Value parameters
disappear. This is in order to allow more of the screen to be shown, providing a
better basis for adjustment.
You can adjust the five parameters at the top, categorised as “Picture Offsets” and
you can set the BACKLIGHT STARTUP.
BACKLIGHT STARTUP can be switched off in this menu in order to carry out panel
luminance characteristics measurements without the corrections performed by the
Backlight Startup Sequence.
The values under “Current Values” show the user’s settings. They cannot be
changed.
BRIGHTNESS
from 0-255
COLOUR
from 0-255
CONTRAST
from 0-255
SCALER CONTRAST
from 0-255
SENSOR CONTRAST
from 0-255
BACKLIGHT STARTUP [ON, OFF]
CURRENT VALUES:
BRIGHTNESS
COLOUR
CONTRAST
SCALER CONTRAST
TINT
SCALER SUB MENU 2
RED, GREEN and BLUE LOOKUP TABLE cannot be selected, instead LCD PANEL is
used.
On LCD PANEL field panel type can be selected. Each panel type has specific LUT
(Lookup Table). The lookup table contains colour saturation values for various
intensities of red, green and blue in the picture.
Possibilities are: 32-L0, 32-L03, 32-L4, 40-L0, 23-L0, 23-L02, 26-L0.
DISPLAY WHITE POINT:
DISPLAY R
from 0-255
DISPLAY G
from 0-255
DISPLAY B
from 0-255
LOOKUP TABLE SELECTION:
LUT RED
[ 0, , 2]
LUT GREEN
[ 0, , 2]
LUT BLUE
[ 0, , 2]
DISPLAY R
[0,]
DISPLAY G
[0,]
Blue stretch
2
LCD panel
26-L0
In BeoCenter 6-26, 26-L0 have to be choosen
ADAPTIVE BACKLIGHT ON/OFF
Is default ON
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK
