Technical data
46
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
2.2.5.5 USB interfaces
Panel PC devices are equipped with a USB 3.0 (Universal Serial Bus) host controller with several USB ports, of
which two USB 3.0 interfaces are routed externally and freely available to the user.
Warning!
USB peripheral devices can be connected to the USB interfaces. Due to the variety of USB devices
available on the market, B&R cannot guarantee their functionality. The functionality of USB devices
available from B&R is guaranteed.
Caution!
Due to the general PC specification, this interface must be handled with the utmost care with regard
to EMC, cable routing, etc.
Universal Serial Bus (USB1, USB2)
1)
Type
USB 3.0
Variant
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s),
high speed (480 Mbit/s) to SuperSpeed (5 Gbit/s)
2)
Current-carrying capacity
3)
USB1, USB2
Max. 1 A
Cable length
USB 3.0
USB 2.0
Max. 3 m (without hub)
Max. 5 m (without hub)
2x USB type A, female
USB 2
USB 1
Table 44: USB1, USB2 interface
1)
The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
2)
Compatibility with SuperSpeed depends on the operating system used.
3)
The USB interface is protected by a maintenance-free "USB current-limiting switch" (max. 1 A).
