BandLuxe E500 Series, Руководство пользователя

Страница: 33 / 40

LTE Outdoor CPE
EN-33
3. To configure the settings, do the following:
 Application

Application: Enter a rule name.

Protocol: Select the trigger port protocol from the drop-down list.

Triggered Range: Enter the start-port and end-port that will trigger
the device to open ports for incoming data
.

Forwarded Range: Enter the start-port and end-port used by the
public port from the WAN side.
 Port Range Trigger

Enabled/Disabled: Select Enable from the drop-down list to enable
firewall.
4. Click APPLY to save the configuration rules.
Enable UPnP
Universal Plug and Play (UPnP) allows automatic discovery and control of
services available on the network from other devices without user intervention.
1. Click Advanced Mode tab and select NAT.
2. Click UPnP.
3. On UPnP, select Enable from the drop-down list to enable the UPnP feature.
4. Click APPLY to save changes.
Configure DMZ
A DMZ (Demilitarized Zone) sets a single computer, called a DMZ host, on your
network to receive unrestricted incoming traffic from the Internet.
1. Click Advanced Mode tab and select NAT.
2. Click DMZ.