LTE Outdoor CPE
EN-16
Configure CPE IP Settings
Modify the IP address configuration of your CPE.
1.
Click Basic Mode tab and select Network Settings.
2.
Click CPE IP Settings.
3.
Modify the necessary settings.
IP Address: Enter the IP address of the CPE.
By default, the IP address is
192.168.168.168
.
Subnet Mask: Display the mask used to divide the IP address.
Device Name: Type a device name to use to access the web-based
utility instead of entering the IP address on the address bar. In the case
of the above illustration, you may type
http://E500.CPE
on the address
bar to access the web-based utility.
4.
Click APPLY to save changes.
Содержание E500 Series
Страница 1: ...EN 1 P N 65012500011 Rev A...
