BandLuxe E500 Series, Руководство пользователя

Страница: 27 / 40

LTE Outdoor CPE
EN-27
3. On Enable Syslog, do the following:
 Enable Syslog: Click Enable to enable the system log.
 Syslog IP: Specify the IP address of the server that will receive the
system log.
4. Click APPLY to save changes.
View System Log
View the current system log entries.
1. Click Advanced Mode tab and select Admin.
2. Click Diagnosis.
3. On System Log, it displays the current system log entries.
 Click REFRESH to refresh the log shown on the screen.
 Click CLEAR to clear the current system log data.
Use Ping Test
Allow the CPE to ping the network devices to verify their connection.
1. Click Advanced Mode tab and select Admin.
2. Click Diagnosis.
3. On Ping test, do the following:
 IP or Address: Enter the IP address of the network device that you want
to ping.
 Packet size: Enter the packet size.
 Number of Pings: Enter the number of pings.
4. Click APPLY to ping other network device.
Use Traceroute Test
Allow the CPE to trace the route that test packets take from one web destination
to another. This function is commonly used to troubleshoot network problems
and identify routing problems or firewalls that may be blocking access to a web
site.
1. Click Advanced Mode tab and select Admin.
2. Click Diagnosis.
3. On Traceroute test, enter the IP or the domain name on IP or Address.
4. Click APPLY to monitor a network trace.