BandLuxe E500 Series, Руководство пользователя

Страница: 32 / 40

LTE Outdoor CPE
EN-32
3. To configure the port forwarding, do the following:
 Application: Enter a rule name.
 LAN IP: Enter the local network IP address of the system hosting the
server.
 WAN Port

Port Range: Enter the start-port and end-port used by the public
port from the WAN side.

Protocol: Select the protocol from the drop-down list.
 Port Range Forward

Enabled/Disabled: Select Enable from the drop-down list to enable
firewall.
4. Click APPLY to save the configuration rules.
Configure Port Range Trigger
Port trigger allows the device to monitor firstly if traffic on certain ports of a
computer is being triggered or being sent out; if so, the incoming traffic from
the Internet on certain ports will be allowed to pass into the same computer.
1. Click Advanced Mode tab and select NAT.
2. Click Port Range Trigger.