Bandit 2550 Скачать руководство пользователя страница 15

Страница: 15 / 98

Bandit

MODELS 2550/2550T

Do not attempt to operate the machine on an ascending or descending slope of more than 25° or 46% or

a side slope of more than 17° or 30%, it is Dangerous and could be Fatal. This is the maximum slope grade

the machine can be operated on if the hydraulic system, self propelled undercarriage, and engine are running

at maximum performance and good traction is sustained.

IF MACHINE IS EQUIPPED WITH A SELF PROPELLED UNDERCARRIAGE

Machines equipped with undercarriage tracks are shipped with a manual from the track manufacturer.

Refer to it for service, operation, and safety information.

SAFETY PROCEDURES

WARNING

25° MAX.

17° MAX.

Maximum Slope Grade

Diagram shows percentage to degree of slope.

Percentage is in vertical feet for every 100 horizontal feet.

Ascending or Descending Slope

Side Slope

100 FT. (30.5 m)

46 FT.

(14 m)

(46%)

30 FT.

(9.1 m)

(30%)

25° MAX.

17° MAX.

The machine should never be parked on a slope

at any time. The machine can coast or creep causing

equipment damage and/or personal injury.

Make sure everyone is clear of machine before

moving the machine. Stay clear of undercarriage

travel system when the machine is moving.

DO NOT entangle feet or hands in undercarriage

travel system.

NEVER sit, stand, lay, climb or ride anywhere

on this machine while it is running, operating, or in

transit. You will be injured.

Use

EXTREME CAUTION

when traveling over

non-level surface! This machine can tip over or tip

backwards on non-level surface. You will cause

engine damage, machine damage and possible

personal injury!

Any increase from the specified maximum

operating angles may cause loss of lubrication

function and damage the engine.

DANGER

WARNING

Содержание 2550



































































































Результаты поиска

Содержание 2550

Отзывы:

Похожие инструкции для 2550

Бренды по названию

Популярные бренды

Bandit 2550, Руководство по эксплуатации

Результаты поиска

Содержание 2550

Отзывы:

Похожие инструкции для 2550

Бренды по названию

Популярные бренды