manualshive.com logo in svg

BANDELIN Trison 4000, Руководство по эксплуатации

Поделиться
Скачать
BANDELIN Trison 4000 Скачать руководство пользователя страница 66

66 / 86

6416h GB/2021-01

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

Checking the rinsing and/or moving function

The most complex cleaning program (“Robotic”) is to be used for checking both 
functions.  

  Turn on the ultrasonic bath.

  Fill the ultrasonic oscillating tank with liquid.

  Select the “Robotic” program and connect the TRISON Twist to the control unit. 

Continue pressing the “Next” key until the channel selector appears (specify 8 mm 
instrument diameters). Select all channels and start. Skip the following soaking 
phase by pressing the “Start” key. Allow the rinsing program to run for approx. 5 
min. During this time, check the following functions:

Rinsing function:
On hoses A1, B1, etc., water should run out visibly during the return cycle. A 

fl

 ow-

through of approx. 350 ml/min should be displayed.

Moving function:
Movement must be visible on the TRISON Twist moving device at the slots. If needed, 
connect a test instrument to make the movement recognisable. 

6.3 

Malfunction/fault analysis  

TRISON ultrasonic baths are designed for high reliability. A possible malfunction due to 
a defective component cannot be fully ruled out, however. Mechanical defects, e.g. on 
the adapters, hoses, etc., are also possible due to wear or improper use.
The following overview of possible sources of error should serve as an aid for error 
detection and troubleshooting. 

Error

Possible cause(s)

Measure(s)

Instruments do not 
move uniformly

The movement has 
been programmed to be 
intentionally chaotic. 
The actuating force is limited, 
thus sluggish instruments can 
only be moved to a limited 
extent.

None

The TRISON Base 
cannot be turned on 
(display remains dark)

TRISON Base connected to 
the mains?

Check the mains connection, see the 
installation instructions. 

Mains switch correctly 
activated?

Check that the mains switch is lit up.

Fuses defective?

If needed, Replace fuses, see 
Section 6.4.3.

No displays or 
incomprehensible 
displays

TRISON Base defective?

Can only be recti

fi

 ed by the manufacturer.

Содержание Trison 4000























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды