manualshive.com logo in svg

BANDELIN Trison 4000, Руководство по эксплуатации

Поделиться
Скачать
BANDELIN Trison 4000 Скачать руководство пользователя страница 58

58 / 86

6416h GB/2021-01

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

4.3  

Completion – post-processing of the ultrasonic bath  

Once sonication is completed, it is necessary to check whether the bath liquid needs 
to be replaced. According to general recommendations, cleaning solutions must be 
replaced immediately in the event of visible soiling, or at least once every working 
day. In the case of disinfecting solutions, the useful life according to manufacturer 
speci

fi

 cations must be observed.

In connection with a replacement of the bath liquid, post-processing of the ultrasonic 
bath must also be conducted according to the following procedure, in order to restore 
the device to a perfectly hygienic condition. 

Maintenance key

Rinsing/disinfection

Emptying/cleaning

Changing the 

fi

 lter

Emptying

End

Emptying/cleaning

  Access the "Draining" submenu.

  Open the outlet and allow the oscillating tank to drain completely. 

In doing so, observe the information regarding disposal of the 
bath liquid agent used. See below for additional instructions.

  Thoroughly rinse the oscillating tank and wipe it out/wipe it down with a soft cloth. 

Proceed in the same way with all accessories, e.g. the TRISON Twist. 

  Connect the hose set with couplings to the TRISON Base and hang the rinsing plug 

or adapter, together with the returns, in the oscillating tank.

  Continue to follow the instructions on the touchscreen to enable the hoses in/on the 

device to pump until empty. 

Notes:

All aqueous agents made by DR. H. Stamm GmbH are prepared in accordance with the 
regulations of the German Washing and Cleansing Agents Act, are biodegradable and 
may be disposed of in the wastewater as working solutions, see Section 7.3.
Disinfection and cleaning agents that become contaminated during use are considered 
"waste material" pursuant to the German Waste Act (AbfG) and may not be taken back 
by the manufacturer. In any case, the statutory provisions and regulations of municipal 
wastewater plants must be complied with. Information is provided by municipal 
wastewater plants as well as by environmental agencies.

Содержание Trison 4000























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды