manualshive.com logo in svg

BANDELIN Trison 4000, Руководство по эксплуатации

Поделиться
Скачать
BANDELIN Trison 4000 Скачать руководство пользователя страница 56

56 / 86

6416h GB/2021-01

1

 electronic GmbH & Co. KG  •  Heinrichstraße 3-4  •  12207 Berlin  •  Deutschland  •  [email protected]

Adapting the instruments

  Properly prepare the instruments before cleaning in the TRISON ultrasonic bath 

and 

rinse on the inside and outside with cold water (of at least drinking 

quality)

.

  Connect the instruments to the adapter on the TRISON Rack and lower into the 

ultrasonic oscillating tank (see Section 3.3.2). Observe the following: 

•  Only clean instruments that have been approved by their manufacturer for 

ultrasonic cleaning. 

•  Do not clean any damaged instruments. 
•  Disassemble instruments that can be taken apart as much as possible. When 

doing so, heed the manufacturer's instructions. Remove sealing caps/seals and 
place them loosely in the basket, open up valves, remove the Luer cap from 
instruments with a lateral rinsing connection. 

•  Fragile parts must not be touching each other. If needed, use special placement 

accessories such as silicone knob mats, see Section 7.

•  The instruments must be fully covered with liquid.

  Only select the rinsing channels that are equipped (see 

Section 3.1). The numbering of the channels can be found 
on the hoses. Do not select channels that are not in use 
(tip: the cleaning duration will be shorter as a result). 

 Start 

cleaning. 

Cleaning

The cleaning operation is conducted automatically. 
At the end, an overview indicates which instruments were 
successfully rinsed (shown in green) and which were "non-
continuous" (shown in red), see also Section 3.1.

Caution!
“Non-continuous instruments” have not been cleaned! They may be cleaned 
again, or removed individually and stored separately. 

Non-continuous instruments 

must undergo another cleaning, or be processed separately. 

End

After removal, the instruments are to be rinsed intensively using water of at least 
drinking quality. Demineralised water should be used for the 

fi

 nal rinsing. Continue 

to handle instruments in accordance with the hygiene plan, German KRINKO 
recommendations, or other applicable national regulations (e.g. drying, function control, 
sterilisation).
Once the cleaning process is completed, a protocol is saved and can be accessed later 
via the interfaces. See Section 3.8.
Before every subsequent cleaning, it is necessary to check whether the bath liquid 
needs to be replaced. 

Содержание Trison 4000























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды