![background image](http://html1.mh-extra.com/html/bandelin/trison-3000-l/trison-3000-l_project-planning-instructions-installation-instructions_470785015.webp)
80
mm
Accessories
e.g. basket
Control unit:
Position of a TB ... R (the data given must be mirrored for the TB ... L).
The control unit can be swivelled.
The customer may have to install an upstream compressed air
fi
lter behind the unit.
In addition, the distance to the rear wall must also be taken into account – any impact with the housing or
compressed air
fi
lter must be avoided!
Tube couplings:
To the extent possible, these
should be positioned in the
exact centre of the tank
since all connected
tubes are the same
length.
Rear wall
Outlet
Must be on the control unit side!
Exterior tank edge
310 mm
a
t l
e
a
s
t
220
mm
Note the swivel
range for the
control unit!
2× Ø 10.5, 80 mm apart
(clearance hole for
screw heads)
Width 6 mm
61279e GB/2018-03
15 / 25
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
6.1
Mains supply switch
6.1.1
Positioning the mains supply switch
Position the mains supply switch dust-free and dry on a
fi
rm base near the HF
generator and the TRISON control unit.
6.1.2
Suspending the mains supply switch
Suspend the mains supply switch dust-free and dry
on a
fi
rm base near the HF generator and control
unit TB.
1. Drill holes for the screws (e.g. M5) leaving 80 mm
of distance between them and ensuring that there
is suf
fi
cient height.
2. Suspend the mains supply switch.
Position diagram
Содержание TRISON 3000 L
Страница 23: ......