![background image](http://html1.mh-extra.com/html/bandelin/trison-3000-l/trison-3000-l_project-planning-instructions-installation-instructions_470785012.webp)
H
S
Over
fl
ow edge
H = S + 10
Table top made of rust-
free stainless steel
Laminate board
Tank
fi
Tank edge
Sealing tape
(supplied)
Sealing agent
(e.g. silicone)
(fastening claws, screws and sealing agent are not included in the scope of supply)
Sealing tape
(supplied)
Sealing agent
(e.g. silicone)
H
S
Over
fl
ow edge
H = S + 10
Table top made of rust-free stainless steel
Laminate board
Tank edge
Support frame made from sectional
steel, welded to the table top
Tank
fi
(screws, discs and sealing agent are not included in the scope of supply)
12 / 25
61279e GB/2018-03
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
4.3
Fixing the tank
Mount the tank below the work surface, see layout samples 1 and 2. Do not weld onto
the stainless steel work surface
results in undesired sound propagation and renders subsequent servicing more
dif
fi
cult.
Layout example 1
Fixing the tank onto the laminate board using screws and fastening claws.
Layout example 2
Fixing the tank by using the pre-fabricated holes in the tank edge. To achieve stable
fi
xation, a support frame made from sectional steel can be welded to the stainless steel
table top, for example.
4.4
Sealing the tank
Ensure a good seal between the tank and work surface so that
- no liquid can access the transducers or the bottom-mount cabinet
can cause a
short circuit in the HF generator
- there is no undesired sound propagation outside of the tank.
Содержание TRISON 3000 L
Страница 23: ......