![background image](http://html1.mh-extra.com/html/bandelin/trison-3000-l/trison-3000-l_project-planning-instructions-installation-instructions_470785016.webp)
Pivot mounted arm
base
Pivot mounted arm head
section, with guides for
TRISON Twist
Distance piece,
not necessary on all
subbases
Base plate with
guides, seal and shim
Base plate
with internal threaded
sockets [M5×6]
Distance piece
slide onto base plate, if
necessary
Seal
Table top made of
rust-free stainless
steel
Laminate board
Shim
Screws on site
4× M5×L
L = Length depends on the
laminate board and the table
top (S-2 ... 5)
S
16 / 25
61279e GB/2018-03
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
7
Pivot mounted arm TRISON Lift (only at TRISON 4000)
The pivot mounted arm TRISON Lift TL 4000 is mounted on the work surface, on the
left (by the left-sided control unit TB ... L) or on the right (by the right-sided control unit
TB ... R), behind the ultrasonic oscillating tank. See enclosed drawing for exact position
speci
fi
cation and hole sizes.
• Use and position the seal as a template, drill (4× Ø 10 mm), and then deburr the drill
holes.
• Align the seal toward the work surface, in accordance with the drill holes.
• Insert the pivot mounted arm's base plate in the drill holes and af
fi
x from below using
suitable screws and the shim.
• Slide the distance piece onto the base plate, if neccessary, like the TRISON lift.
This is only than useful if the laminate board ist thinner than 20 mm!
Assembly diagram:
Содержание TRISON 3000 L
Страница 23: ......